McB Steel, Inc. (structural steel & steel fabricator) is located in Bessemer, Alabama. This is approximately 10 miles west of Birmingham, Alabama.

for a larger map, visit our map page here

We are a steel fabricator. Our most typical products include structural steel (steel fabrication), handrail, plate, miscellaneous iron work, etc. During the past several years, we have fabricated various items for several major companies.
 
On average, we have about 25-30 shop employees (5 of which are qualified welders, and 1 inspector) and 4-6 office employees.
Our inspection agency is Pittsburg Testing Laboratories.
We use outside agencies for x-ray and radiograph.
Our plant is non-union, and we have one work shift per day, at this time.
Our mill sources are: U.S. Steel Corporation, Inland Steel Company, Northwestern Steel and Wire Company, Armco, Inc., and O'Neal Steel, Inc.

 

Plant Facilities

Approximate inside working areas: 52,000 sq. feet
Yard: 377' x 1340'
We have facilities for shipping by truck - only from the plant site. However, we do have a siding available approximately 2 miles from the plant.
We have 3 10-ton overhead cranes and one 6-ton crane
60'-0" and 65'-0" span 27'-0" height

 

Fabrication Equipment

Riveting Euipment 4 Punches: 75, 90,100, and 125 tons
4 Saws: 14" x 14" Hacksaw, 2 Johnson 30 Bandsaws 10' x 20"
14 Welding Machines
Rod, Bar, and Angle Shear
Press Brake 1/4" x 8'-0"
Plate Roll 3/8 x 10'-0"
3 Hydraulic Presses 40 tons
2 Sandblast Pangborn Pots
Painting - airless and conventional